Ascus function: From squirt guns to ooze tubes.

Unlike the mechanism of ballistospore discharge, which was not solved until the 1980s, the operation of asci as pressurized squirt guns is relatively straightforward and was understood in the nineteenth century. Since then, mycologists have sought to understand how structural adaptations to asci have allowed the ascomycetes to expel spores of different shapes and sizes over distances ranging from a few millimeters to tens of centimeters. These modifications include the use of valves at the tips of asci that maintain ascus pressure and expel spores at the highest speeds, and gelatinous appendages that connect spores after release and create larger projectiles with greater momentum than single spores. Clever experiments in the twentieth century coupled with meticulous microscopic studies led investigators to understand how asci with complicated apical structures worked and mathematical models produced estimates of launch speeds. With the recent application of high-speed video microscopy, these inferences about ascus function have been tested by imaging the motion of spores on a microsecond timescale. These experiments have established that ascospore discharge is the fastest fungal movement and is among the fastest movements in biology. Beginning with the history of the study of asci, this review article explains how asci are pressurized, how spores are released, and how far spores travel after their release. We also consider the efficiency of ascospore discharge relative to the mechanism of ballistospore discharge and examine the way that the squirt gun mechanism has limited the morphological diversity of ascomycete fruit bodies.

Solving the aerodynamics of fungal flight: how air viscosity slows spore motion.

Viscous drag causes the rapid deceleration of fungal spores after high-speed launches and limits discharge distance. Stokes' law posits a linear relationship between drag force and velocity. It provides an excellent fit to experimental measurements of the terminal velocity of free-falling spores and other instances of low Reynolds number motion (Re<1). More complex, non-linear drag models have been devised for movements characterized by higher Re, but their effectiveness for modeling the launch of fast-moving fungal spores has not been tested. In this paper, we use data on spore discharge processes obtained from ultra-high-speed video recordings to evaluate the effects of air viscosity predicted by Stokes' law and a commonly used non-linear drag model. We find that discharge distances predicted from launch speeds by Stokes' model provide a much better match to measured distances than estimates from the more complex drag model. Stokes' model works better over a wide range projectile sizes, launch speeds, and discharge distances, from microscopic mushroom ballistospores discharged at <1 m s(-1) over a distance of <0.1mm (Re<1.0), to macroscopic sporangia of Pilobolus that are launched at >10 m s(-1) and travel as far as 2.5m (Re>100).

Biomechanics of invasive growth by Armillaria rhizomorphs.

Rhizomorphs of wood-decay basidiomycetes are root-like structures produced by the coordinated growth of thousands of hyphae. Very little is known about their development nor the way that they penetrate soils and rotting wood. In this study, we applied techniques used in previous studies on hyphae to explore the mechanics of the invasive growth process in Armillaria gallica. Growth rate measurements were made in media with different gel strengths. The osmolyte composition of rhizomorph sap was determined spectroscopically and the forces exerted by growing tips were measured using a force transducer. Cultured rhizomorphs extended at much faster rates than unbundled hyphae (3.5mmd(-1) versus 1.5mmd(-1)) and their growth accelerated in response to increased medium gel strength (to 7.4mmd(-1)). Measurements of rhizomorph osmolality provided a turgor pressure estimate of 760kPa (7.5atm.), and spectroscopic analysis showed that this pressure was generated by the accumulation of erythritol, mannitol, and KCl. Forces exerted by growing tips ranged from 1 to 6mN, corresponding to pressures of 40-300kPa (0.4-3.0atm.). Pressures exerted by extending rhizomorphs are comparable to those produced by individual vegetative hyphae. This suggests that the mechanical behavior of hyphae is similar whether they grow as unbundled cells or aggregate to form macroscopic rhizomorphs.

Adaptation of the spore discharge mechanism in the basidiomycota.

BACKGROUND: Spore discharge in the majority of the 30,000 described species of Basidiomycota is powered by the rapid motion of a fluid droplet, called Buller's drop, over the spore surface. In basidiomycete yeasts, and phytopathogenic rusts and smuts, spores are discharged directly into the airflow around the fungal colony. Maximum discharge distances of 1-2 mm have been reported for these fungi. In mushroom-forming species, however, spores are propelled over much shorter ranges. In gilled mushrooms, for example, discharge distances of <0.1 mm ensure that spores do not collide with opposing gill surfaces. The way in which the range of the mechanism is controlled has not been studied previously. METHODOLOGY/PRINCIPAL FINDINGS: In this study, we report high-speed video analysis of spore discharge in selected basidiomycetes ranging from yeasts to wood-decay fungi with poroid fruiting bodies. Analysis of these video data and mathematical modeling show that discharge distance is determined by both spore size and the size of the Buller's drop. Furthermore, because the size of Buller's drop is controlled by spore shape, these experiments suggest that seemingly minor changes in spore morphology exert major effects upon discharge distance. CONCLUSIONS/SIGNIFICANCE: This biomechanical analysis of spore discharge mechanisms in mushroom-forming fungi and their relatives is the first of its kind and provides a novel view of the incredible variety of spore morphology that has been catalogued by traditional taxonomists for more than 200 years. Rather than representing non-selected variations in micromorphology, the new experiments show that changes in spore architecture have adaptive significance because they control the distance that the spores are shot through air. For this reason, evolutionary modifications to fruiting body architecture, including changes in gill separation and tube diameter in mushrooms, must be tightly linked to alterations in spore morphology.

The fastest flights in nature: high-speed spore discharge mechanisms among fungi.

BACKGROUND: A variety of spore discharge processes have evolved among the fungi. Those with the longest ranges are powered by hydrostatic pressure and include "squirt guns" that are most common in the Ascomycota and Zygomycota. In these fungi, fluid-filled stalks that support single spores or spore-filled sporangia, or cells called asci that contain multiple spores, are pressurized by osmosis. Because spores are discharged at such high speeds, most of the information on launch processes from previous studies has been inferred from mathematical models and is subject to a number of errors. METHODOLOGY/PRINCIPAL FINDINGS: In this study, we have used ultra-high-speed video cameras running at maximum frame rates of 250,000 fps to analyze the entire launch process in four species of fungi that grow on the dung of herbivores. For the first time we have direct measurements of launch speeds and empirical estimates of acceleration in these fungi. Launch speeds ranged from 2 to 25 m s(-1) and corresponding accelerations of 20,000 to 180,000 g propelled spores over distances of up to 2.5 meters. In addition, quantitative spectroscopic methods were used to identify the organic and inorganic osmolytes responsible for generating the turgor pressures that drive spore discharge. CONCLUSIONS/SIGNIFICANCE: The new video data allowed us to test different models for the effect of viscous drag and identify errors in the previous approaches to modeling spore motion. The spectroscopic data show that high speed spore discharge mechanisms in fungi are powered by the same levels of turgor pressure that are characteristic of fungal hyphae and do not require any special mechanisms of osmolyte accumulation.

Relationship between temperature optima and secreted protease activities of three Pythium species and pathogenicity toward plant and animal hosts.

The in vitro physiological characteristics of three species of Pythium (oomycetes) that utilize different food sources were compared with their ecological activities: P. insidiosum is a pathogen of mammals (including humans), P. graminicola infects the roots of graminaceous hosts, and P. grandisporangium is an enigmatic water mold isolated from mangrove leaves and marine algae. P. insidiosum and P. graminicola showed peak growth rates at 37 degrees C before complete inhibition of growth at 40 degrees C; P. grandisporangium grew fastest at 22 degrees C. Differences between the invasive pressures exerted by the hyphae of these microorganisms were not considered significant in relation to the substrates colonized by these water molds. All three species showed substantial secreted protease activity, producing three or more serine proteases with weights ranging from 24-38 kDa. Fastest growth rates were supported when collagen was supplied as the sole carbon source, and none of the species were able to grow on purified plant cell wall polysaccharides. The growth and nutritional characteristics of P. graminicola and P. grandisporangium bear little obvious relationship to the ecological niches that they inhabit. This highlights the caution necessary in extrapolating from laboratory analyses to the natural environment, and points to the potential importance of ecological opportunity in determining the host range and food source of certain microorganisms.

New information on the mechanism of forcible ascospore discharge from Ascobolus immersus.

Many ascomycete fungi spurt their spores from asci pressurized by osmosis. This paper explores the details of this process in the coprophilous species Ascobolus immersus, through a combination of biomechanical and biochemical experiments, and mathematical modeling. A. immersus forms large asci that expel 8 spores as a single, mucilage-embedded projectile. Measurements of ascus turgor using a microprobe attached to a strain gauge showed a pressure of 0.3 MPa or 3 atm. Analysis of ascus sap using GC/MS identified glycerol as a major osmolyte, accounting for 0.1 MPa of the osmotic pressure within the ascus sap. A mathematical model indicated that a pressure of 0.2 MPa would be sufficient to propel the cluster of ascospores over the distance measured in previous studies. The difference between the measured and predicted pressures is ascribed to loss of pressure as the spores are forced through the tip of the open ascus.